PS4 Designer Skin for Sony Playstation 4 Console System Plus Two(2) Decals For: PS4 Dualshock Controller - Batman
Not Available Discontinued - Unfortunately this product has been discontinued and we will not be receiving any more stock. Click here for alternative products.
Instruction Manuals: 1. Clean the unit's surface as thoroughly as possible. Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminates. Most issues of non-sticking are due to some type of oil or grease that is on the unit PRIOR to installation. 2. Peel one piece of the Skin from the paper liner. NOT to let the adhesive side touch anything. 3. Determine the placement, apply the Skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface. 4. If a piece is not going on straight, you can gently lift it back up. Do not stretch it from its original size. 5. If installed slowly and carefully, there should be NO air bubbles left under the skin. Any air that may become trapped under the skin during installation will go away in time. Optional: For the best result, apply hot air to the decal surface to activate chemical agent for better stickiness. Using a hair dryer is fine. Uninstall Simply peel off the sticker. No sticky mess or residue left. Note Due to occasional heat, cold, or moist conditions at warehouse or during shipment, a few decals may lose some stickiness and cause peeling after applying.
Highest Quality, Full Color, Anti-Slip Grip-Like Vinyl Sticker. Will not Scratch, Fade (UV Resistant) or Peel. Easy Install & Removal. No Sticky Mess Guaranteed. Fits Sony PlayStation 4 Next-Gen Console & Two(2) Dualshock Controllers. Precision Cut, Easy Access for Buttons, Controls, & Connectors.