PS4 Designer Skin for Sony Playstation 4 Console System Plus Two(2) Decals For: PS4 Dualshock Controller - Skull of Blue Fire
PS4 console with faceplateand mods ps4 controller skins for PS4 games PS4 accessories are easy installed and removal. Skin for a PS4 for ps4 controller will not leave behind games decals residue. The ps4 new controller decal will prevent it from dust proof, waterproof, oil proof and fingerprints. PS4 remote PS4 and console custom ps4 controller decals will not scratch, fade or peel.
1) Clean the unit's surface as thoroughly as possible.Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminates. Most issues of non-sticking are due to some type of oil or grease.
2) Peel one piece of PS4 Decals from the paper liner. NOT to let the adhesive side touch anything.
3) Determine the placement, apply the ps4 console and controller skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface.
4) If a piece is not going on straight, you can gently lift it back up. Do not stretch it from its original size.
5) If installed slowly and carefully, there should be NO air bubbles left under the sticker. Any air that may become trapped during installation will go away in time.
6) During the cold weather or for a better result, apply hot air to the decal surface by using a hair dryer or hot air gun to activate chemical agent while putting the sticker. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin.
- One(1) Skin for Sony PlayStation 4 Console.
- Two(2) Stickers for Dualshock 4 Controller.
- Actual Console and Controllers not included.